Bulk Storage and Dispensing Systems

Component failure is mainly caused by oil contamination. So it’s logic that oil cleanliness is given a high priority. Consequently repair costs, downtime and machinery failure will be kept to a minimum.

New oil can be contaminated when leaving the refinery or during transport or during transfer to the oil tank or by the way new oil is stored.

Oil Storage

To avoid contamination, oil should preferably be stored inside and remained sealed until needed.

When storage of drums outside is unavoidable:

• The drums should be stored horizontally and covered or store them at a tilt to prevent moisture from pooling and ingesting through the bungs.
• The first-in/first-out method should be followed
• Minimum possible quantities necessary should be stored. 
• Use labels that resist moisture and sun damage

By doing so risk of product degradation and contamination are reduced.

When storing oil containers or drums indoors:

• They are best stored on their sides (horizontally) with bungs at the 3 o’clock and 9 o’clock positions. This prevents moisture from accumulating on the top and also minimizes the ingress of air through the bungs.
• The storage area should be a clean, cool, and dry, free from extreme temperatures.
• Minimize the presence of any contaminants.
• Proper oil storage is critical to maintaining a clean and healthy fluid, thereby  improving the chances of having healthy machines with long service lives.

It is easier to maintain low particulate contamination levels when oils are stored in bulk tanks.

Why?

Because  they are normally closed to the atmosphere and the oil is dispensed via a pump or tap.

The advantage of Bulk Storage Tanks:

• It helps keep workshops and outbuildings clean and tidy 
• It keeps a safer working environment
• It avoids contamination of products
• It helps environment by using less packaging and by avoiding container spillages

Enluse can help you make the right choice for your situation. A wide range of bulk oil systems  is available. For more information, a quotation or technical advice please contact us.