Slip Fit Male Threaded Adapters are designed to be compatible with Air Sentry breathers featuring a 1″ slip fit connection, specifically for reservoirs or gearboxes possessing ample wall thickness to accommodate a tapped hole. These adapters are universally compatible with all breathers featuring slip fit connections.
Base Material: Schedule 40 PVC
Slip-fit female threaded adapters
Slip Fit Female Threaded Adapters are designed to be used with Air Sentry breathers equipped with a 1″ slip fit connection, specifically for reservoirs or gearboxes possessing adequate wall thickness to accommodate a tapped hole. These adapters are compatible with all breathers featuring slip fit connections.
Slip Fit Threaded Spin-On Adapters serve as substitutes for the conventional spin-on particle filters produced by various manufacturers. They are compatible with Air Sentry breathers featuring 1″ slip-fit connections and are offered in diverse sizes and thread configurations. They require no alterations to the tank. Compatible with all breathers featuring slip fit connections.
Slip Fit Flange Adapters are designed for breathers equipped with a 1″ slip-fit connection. They are particularly useful for reservoirs lacking sufficient tank wall thickness to accommodate thread tapping. The Model A101 adapter allows drilling mounting holes in the high-impact ABS molded flange to match any desired hole pattern. Meanwhile, the Model A114 flange adapter comes pre-drilled with a standard ANSI 6-hole pattern for mounting convenience. Compatible with all breathers featuring slip fit connections.
Slip Fit Bayonet Adapters are substitutes for standard breather caps used in hydraulic reservoirs. To install, remove the existing breather cap, position the bayonet adapter onto the breather flange, and rotate it one-quarter turn. This process requires no modifications to the tank.
Base Material: High Density EDPM, Gasket, Metal Dowel
Bayonet Adapters serve as replacements for the conventional breather cap on hydraulic reservoirs. Installation involves removing the existing breather cap, positioning the bayonet adapter onto the current flange, and rotating it one-quarter turn. No modifications to the tank are necessary, and they are compatible with Air Sentry breathers featuring a 1″ NPT connection.
Acquiring oil through an oil sampling port is crucial for accurate analysis. Without an authentic sample, oil analysis reports might lack precision. Utilizing a sample port adapter grants access to the lubricant, screwing into the sample port of most Air Sentry adapter kits. This adapter enables the extraction of oil samples from the system, which can then be transferred into a clean sampling bottle for analysis. This method ensures that the lubricant remains uncontaminated by avoiding direct exposure during equipment access.
The Threaded Metal Adapters are compatible with the X-Series – X100 breather and all Z-Series breathers. They feature a ½” male NPT breather connection, offering compatibility with various reservoir connection types. These adapters are suitable for use with all Z-Series breathers and the X100 breather.
The Splash Adapter, crafted from anodized steel, is offered in sizes of 1” MNPT and 2” MNPT. Its purpose is to shield the breather from potential fluid splashes when installed on mobile, off-road, or mining equipment.